Car Radiator Coolant Filling Funnel Kit

Proper Installation and Secure Filling: Ensure the Correct Adapter Size and Tight Fit to Prevent Leaks 1. Place the gasket in a downward position.

Cooling System Preparation: Engine Off, Fill the Funnel Partially, Avoid Air Pockets 1. YOUR CAR SHOULD BE OFF, DO NOT START THE CAR YET! 2. Fill the coolant funnel about 1/3 up while the system is COLD, so when the system burps, the fluid falls into the system rather than more air.

Bleeding the Cooling System: Set Climate Controls, Start the Engine, Monitor Coolant Level 1. Go to your car and set the climate control settings (or heat setting) to the hot position, but make sure that the fan/heater is "OFF". 2. Now START your car, let the car idle for a while until it's hot enough to open the thermostat and turn on the fans. 3. After waiting, and once the thermostat opens up to cool your engine, you'll see the coolant level drop, and a few to a large amount of air coming up, as this is the air escaping your cooling system. 4. After a standard hour of running, if you still see air bubbles coming out, check your overflow tank and make sure it has coolant in it. 5. When running the engine, the fluid level should be at a low position. Keep the RPM on idle position. (Shut down the engine if you notice the fluid level rising excessively. Wait for the fluid level to go lower before restarting the engine.) 6. Once the bubbling has stopped, use the Fluid Stopper for any remaining fluid inside the funnel.

Product Details: - Colour: Black, Yellow, Transparent - Material: Plastic and Metal - Package Contents: 1 set of Spill Proof Coolant Filling Kit (no other products included)

Note: - Lighting and display differences may cause the item color to appear slightly different from the actual product. - Measurement error tolerance is +/- 1-3 cm.

Robust Construction and Secure Filling: - Made of Plastic and Metal materials, tested to withstand 200 degrees Celsius and accidental drops (unless encountering severe external force). - Highly sealed interface and clear funnel design allow for quick visual check of the coolant and mess-free filling.

Innovative Bleeding Kit and Versatile Compatibility: - The Coolant Funnel controls the coolant entering the system and enables unattended Filling, eliminating air pockets that may cause instability in the cooling system and heater. - Multiple adapters, 2x45-degree elbows, and a 5-inch extender allow the kit to fit Radiators or Surge Tanks on most Domestic and Import Cars and Light Trucks.

Economic Design and Efficient Storage: - The Fluid Stopper helps you economically recycle unused coolant in the funnel after use. - The bright color and sealed lid make for efficient storage of the product.

product information: